PTFE and PFA Coating Oven Manufacturers

MV International considers several factors while developing an oven that suits particular applications in the best possible manner. The type of powder, the thickness of the product, material composition, cost of operation, and product size. The PTFE & PFA Coating Oven should harden and cure the powder coating for the long run. We strive to obtain a high-quality finished product by developing and designing the models in a world-class manner.

The powder material acquires substantial heat from the PTFE & PFA Coating Oven for transforming it into a durable thermosetting finish. The application of heat gets altered by the powder material, which is thermally reactive and can bring about the transformation very effectively.

• • A good amount of air must get flown into the oven. Every PTFE & PFA Coating Oven manufacturer needs to take care of it.
• • A uniform distribution of heat needs to be maintained all over the parts.
• • It prevents contamination to enter the heated air space
• • The heating time needs to be preset by the operator.

• SPECIFICATION

  Size of the working chamber	As per client requirement.
  Material of construction	Mild Steel, Stainless Steel 304 / 316 or any.
  Temperature Range	Ambient to 1500C / 2500C / 4000C / 5000C.
  Air circulation	Vertical, Horizontal or Combination. High Volume and high Velocity Airflow provides twice the air changes compare to ordinary Industrial Ovens.
  Timer	Digital Pre-Settable with range up to 0 to 999 Minutes / Seconds
  Paint	Enamel Paint / Epoxy Coating / Powder Coated.
  Power supply	230 Volts Single Phase 50Hz / 60Hz 415 Volts 3 Phase 50Hz / 60Hz
  Heating Elements	Low wattage Incoloy sheathed heating elements / SS Tubular
  Insulation	Ceramic Wool / Mineral Wool
  Door Gasket	Fibre Glass Rope (High Temp) / Silicon Gasket.
  Heavy Duty Shelves / Trays	Made out of angles with wire knitted mesh or perforated sheet suitable for oven internal size will be provided along with the oven.
  Exhaust Manual or Automatic	Automatic forced exhaust system with fresh air inlet. Manually adjustable damper with fresh air inlet.
  Heating Media	Electric / Gas / Diesel / Steam / Thermic OIL etc.

• OPTIONAL FEATURES

  Temperature Control	PID with or without Profile Setting (Temp Up and Down) can be provided with SSR/ SCR for high accuracy. The programming of PID can vary from 4 to 50 programmes.
  Temperature Recorder	Microprocessor chip-based paper less, Multi-Stage Temp. Indicator cum Recorder.
  PLC With HMI	PLC can be provided for automation and integration of whole system, data feeding, process display, and fault indication can be seen in HMI.
  SCADA System	High quality integration and controlling system from one point can be done with SCADA.
  Door	A. Door interlocking system will switch off the blower and the heating system if the oven doors are open B. Doors on both ends C. Vertical lift door
  Fumes Outlet	Forced exhaust blower
  Windows and lights	A. Viewing window B. Interior lights and Access ports for calibration C. Oven on switch- Illuminated D. Heat on switch- Illuminated
  Timer and Alarm	A. 24/7 timer B. Audible/visual alarm indicators