Adhesive Curing Oven Manufacturers

Introduction

Industrial curing ovens for adhesives provide exclusive uniformity in the underlying temperature to allow the optimum cure of your products and adhesives. Moreover, an adhesive curing oven is available in conveyor and batch configuration to work well for every manufacturing or construction unit today.

Features of Curing Oven for Adhesives

An adhesive curing oven possesses the following features for the heat treatment of adhesives and glues.

• • May operate at a high temperature of about 400 Degrees Fahrenheit
• • Comes with NEMA control panels
• • Equips with fully wired and undergoes testing with digital temperature controls
• • Airflow arrangement for the optimization of airflow efficiencies
• • Uniformity in temperature

Types of Adhesive Ovens

MV International has the expertise to design and supply the following curing ovens for glues and adhesives.

• • Belt conveyor curing ovens
• • Air-sealed curing ovens
• • Trolley conveyor curing ovens
• • Chain conveyor ovens
• • Composite curing ovens
• • Custom adhesive curing oven

Applications of Curing Oven for Adhesives

Adhesive curing oven products have wide applications in different industries, which include the following

• • Aerospace
• • Automotives
• • Foundry
• • Finishing
• • Heat treatment
• • Composite energy
• • Military and laboratories
• • Pharmaceutical industries

What type of Adhesive Curing Oven Do We Offer?

Our engineers at MV International have the expertise to design industrial curing ovens for adhesives and glues to work well in different industries and deliver the best curing result for a product. We design curing ovens in continuous configuration or batch configuration cure coatings and parts.

• SPECIFICATION

  Size of the working chamber	As per client requirement.
  Material of construction	Mild Steel, Stainless Steel 304 / 316 or any.
  Temperature Range	Ambient to 1500C / 2500C / 4000C / 5000C.
  Air circulation	Vertical, Horizontal or Combination. High Volume and high Velocity Airflow provides twice the air changes compare to ordinary Industrial Ovens.
  Timer	Digital Pre-Settable with range up to 0 to 999 Minutes / Seconds
  Paint	Enamel Paint / Epoxy Coating / Powder Coated.
  Power supply	230 Volts Single Phase 50Hz / 60Hz 415 Volts 3 Phase 50Hz / 60Hz
  Heating Elements	Low wattage Incoloy sheathed heating elements / SS Tubular
  Insulation	Ceramic Wool / Mineral Wool
  Door Gasket	Fibre Glass Rope (High Temp) / Silicon Gasket.
  Heavy Duty Shelves / Trays	Made out of angles with wire knitted mesh or perforated sheet suitable for oven internal size will be provided along with the oven.
  Exhaust Manual or Automatic	Automatic forced exhaust system with fresh air inlet. Manually adjustable damper with fresh air inlet.
  Heating Media	Electric / Gas / Diesel / Steam / Thermic OIL etc.

• OPTIONAL FEATURES

  Temperature Control	PID with or without Profile Setting (Temp Up and Down) can be provided with SSR/ SCR for high accuracy. The programming of PID can vary from 4 to 50 programmes.
  Temperature Recorder	Microprocessor chip-based paper less, Multi-Stage Temp. Indicator cum Recorder.
  PLC With HMI	PLC can be provided for automation and integration of whole system, data feeding, process display, and fault indication can be seen in HMI.
  SCADA System	High quality integration and controlling system from one point can be done with SCADA.
  Door	A. Door interlocking system will switch off the blower and the heating system if the oven doors are open B. Doors on both ends C. Vertical lift door
  Fumes Outlet	Forced exhaust blower
  Windows and lights	A. Viewing window B. Interior lights and Access ports for calibration C. Oven on switch- Illuminated D. Heat on switch- Illuminated
  Timer and Alarm	A. 24/7 timer B. Audible/visual alarm indicators