Lacquer Curing Oven Manufacturer, Supplier & Exporter
A lacquer curing oven cures the base-coat and top-coat lacquers used in vacuum metallizing of plastic, metal and glass articles. The base coat gives a smooth, sealed surface for the metal layer to adhere to, and the top coat protects the thin metal film. Both coats must be cured fully and evenly for good adhesion and gloss.
MV International has designed lacquer curing ovens specifically for the vacuum metallizing industry, drawing on more than 30 years of oven manufacturing experience. Batch trolley and conveyor versions are available, with dust-controlled air.
Key Features of Our Lacquer Curing Oven
- Uniform temperature for base and top-coat curing
- Filtered air to keep dust off wet lacquer
- Trolley, rack or conveyor loading
- Accurate control in the 60-150°C range
- Solvent exhaust system
- Programmable cure cycles
Lacquer Curing Oven Applications
- Base-coat curing before vacuum metallizing
- Top-coat curing after metallizing
- Automotive reflectors and trims
- Cosmetic packaging and caps
- Decorative glass and plastic articles
- Lighting reflectors
How the Lacquer Curing Oven Works
After spray or dip lacquering, articles are loaded on racks and placed in the oven. Filtered warm air removes solvent and cures the lacquer at the specified temperature. After metallizing, the top coat is cured in the same way.
Lacquer Curing Oven Technical Specifications
| Size of the working chamber | As per client requirement. |
|---|---|
| Material of construction | Mild Steel, Stainless Steel 304 / 316 or any. |
| Temperature Range | Ambient to 150°C / 250°C / 400°C / 500°C. |
| Air circulation | Vertical, Horizontal or Combination. High Volume and high Velocity Airflow provides twice the air changes compared to ordinary Industrial Ovens. |
| Timer | Digital Pre-Settable with range up to 0 to 999 Minutes / Seconds |
| Paint | Enamel Paint / Epoxy Coating / Powder Coated. |
| Power supply | 230 Volts Single Phase 50Hz / 60Hz 415 Volts 3 Phase 50Hz / 60Hz |
| Heating Elements | Low wattage Incoloy sheathed heating elements / SS Tubular |
| Insulation | Ceramic Wool / Mineral Wool |
| Door Gasket | Fibreglass Rope (High Temp) / Silicone Gasket. |
| Heavy Duty Shelves / Trays | Made out of angles with wire knitted mesh or perforated sheet suitable for oven internal size will be provided along with the oven. |
| Exhaust Manual or Automatic | Automatic forced exhaust system with fresh air inlet. Manually adjustable damper with fresh air inlet. |
| Heating Media | Electric / Gas / Diesel / Steam / Thermic OIL etc. |
Optional Features
| Temperature Control | PID with or without Profile Setting (Temp Up and Down) can be provided with SSR/ SCR for high accuracy. The programming of PID can vary from 4 to 50 programmes. |
|---|---|
| Temperature Recorder | Microprocessor chip-based paper less, Multi-Stage Temp. Indicator cum Recorder. |
| PLC With HMI | PLC can be provided for automation and integration of whole system, data feeding, process display, and fault indication can be seen in HMI. |
| SCADA System | High quality integration and controlling system from one point can be done with SCADA. |
| Door | A. Door interlocking system will switch off the blower and the heating system if the oven doors are open B. Doors on both ends C. Vertical lift door |
| Fumes Outlet | Forced exhaust blower |
| Windows and lights | A. Viewing window B. Interior lights and Access ports for calibration C. Oven on switch- Illuminated D. Heat on switch- Illuminated |
| Timer and Alarm | A. 24/7 timer B. Audible/visual alarm indicators |
Lacquer Curing Oven Manufacturer, Supplier & Exporter
Lacquer Curing Oven Manufacturer in India
MV International is an ISO 9001:2015 certified lacquer curing oven manufacturer with more than 35 years of experience in industrial heating. Fabrication, insulation, electrical panel building and testing are done in-house at Bahadurgarh, Haryana, which lets us control quality and delivery time. Each lacquer curing oven is built to your load, process temperature (up to 200°C) and floor space rather than picked from a catalogue.
Lacquer Curing Oven Supplier
Looking for a reliable lacquer curing oven supplier? We have supplied ovens to vacuum metallizers, automotive trim and cosmetic packaging manufacturers and to OEMs and job shops in every major industrial state of India. You get one point of contact for design, manufacturing, delivery, installation and service, with heaters, blowers and controllers available from stock.
Lacquer Curing Oven Exporter
MV International is also an established lacquer curing oven exporter. We ship to the Middle East, Africa, South and South-East Asia, Europe and the Americas, including Kenya, South Africa, UAE, Qatar and United States. Export ovens are built for the local supply voltage and frequency (50 Hz or 60 Hz), packed in seaworthy wooden crates and sent with complete documentation.
Why Buy from MV International?
- In-house design and manufacturing since 1989, ISO 9001:2015 certified
- Custom chamber sizes, temperatures up to 500°C and electric, gas, diesel or steam heating
- Uniform air flow with high-volume blowers and PID/PLC temperature control
- Every oven is trial-run and tested before dispatch
- Installation, training, spares and after-sales service across India and abroad
Lacquer Curing Oven FAQs
What temperature is used for lacquer curing?
Typically 60-90°C for plastics and higher for metal or glass, according to the lacquer supplier.
Why is filtered air important?
Dust on wet lacquer shows up as defects after metallizing, so the air entering the oven is filtered.
Can UV lacquers be cured?
UV lacquers need a UV curing system. Our ovens are used for flash-off and thermal-cure lacquers.
What is the price of a Lacquer Curing Oven?
The price of a lacquer curing oven depends on chamber size, maximum temperature, heating media (electric, gas, diesel or steam), material of construction and the control system. Share your load details, process temperature and cycle time, and MV International will send a detailed quotation, usually within 24 hours.
Can you supply the Lacquer Curing Oven to buyers abroad?
Yes. Along with supplying all over India, we export the lacquer curing oven to the Middle East, Africa, Asia, Europe and the Americas. Ovens are built for your local power supply and shipped with complete documentation and commissioning support.
Need a lacquer curing oven? Send your part size, process details and production rate to sales@industrialoven.com or call +91 97182 90000. Our engineers will suggest the right model and send a quotation.
Related Industrial Ovens
Industrial Heating Ovens | Tempering Oven | Oil Fired Oven | Gas Fired Oven | Brake Shoe Curing Oven | Forced Air Circulation Oven
Get the Right Oven
for Your Process
talk to our engineers